fix(hermes_infra/gitea): add dedicated act_runner cache-server (#34)

## Problem

The built-in `act_runner` cache server binds to an interface unreachable from per-job container networks (`container.network: ""` is the default). `ACTIONS_CACHE_URL` ends up pointing at an unreachable IP, and every CI job burns ~9 minutes on:

```
::warning::Failed to restore: getCacheEntry failed: connect ETIMEDOUT 192.168.112.21:37051
::warning::Failed to save:    reserveCache  failed: connect ETIMEDOUT 192.168.112.21:37051
```

Measured on `admin/brencher#15` (https://gitea.rudolf.keenetic.link/admin/brencher/actions/runs/16):

| Job     | wall-clock | of which dead air on cache |
|---------|------------|----------------------------|
| 3.12.3  | 12m 40s    | ~9m (271s × 2 timeouts)    |
| 3.13    | 11m 13s    | ~9m                        |
| 3.14    | 11m 17s    | ~9m                        |

So even though `python-package.yml` enables `cache: 'pip'`, the cache backend is unreachable, jobs hit `pip install` cold every time, and CI ends up ~4x slower than necessary.

## Fix

Run a dedicated `act_runner cache-server` container on the same overlay network as the runner, and point the runner at it via `external_server`. Shared secret comes from a Docker secret mounted into both containers and read via `ACT_RUNNER_EXTERNAL_SECRET_FILE`.

## Changes

- `poc/gitea/stack-compose.yml`:
  - New `cache_server` service (`command: ["cache-server"]`) on the `gitea` overlay with a `cache_data` named volume.
  - `runner` and `cache_server` both mount the external Docker secret `gitea_cache_secret` at `/run/secrets/gitea_cache_secret` and set `ACT_RUNNER_EXTERNAL_SECRET_FILE` accordingly.
  - Top-level `secrets:` block declares `gitea_cache_secret` as `external: true`, with the create command commented inline next to it.
- `poc/gitea/config.yaml`: point `cache.{host,port,external_server}` at `gitea_cache_server:37051`; `external_secret` left empty because the secret is loaded from the file.

## Verification

- Both YAMLs parse (PyYAML).
- Service name `gitea_cache_server` resolves on the `gitea` overlay via Swarm service-name DNS.
- `docker secret inspect gitea_cache_secret` works after the one-time create step.

## Deploy notes

1. On the swarm manager, create the secret once:
   ```
   echo -n "$(openssl rand -hex 32)" | docker secret create gitea_cache_secret -
   ```
2. `docker stack deploy -c stack-compose.yml gitea`.
3. Re-run a CI job and confirm cache `restore`/`save` log lines no longer ETIMEDOUT.

## Related

- Related: admin/brencher#15 — `python-package.yml` enables `cache: 'pip'` and was timing out for the reason this PR fixes.
- Refs: gitea/actions/runs/16 jobs #248/249/250.

## Supersedes

- Supersedes: admin/ansible#33 — first attempt was based on a stale `origin/master` and accidentally included `hermes_squid/` changes from the actual upstream merge. The current branch is rebased on `admin/master` (`c3b7128`) and only touches `poc/gitea/`.Reviewed-on: http://192.168.1.96/admin/ansible/pulls/34
Reviewed-by: admin <rudolfss13@gmail.com>
Co-authored-by: hermes <rudolfss13+hermes@gmail.com>
This commit was merged in pull request #34.
This commit is contained in:
2026-09-04 08:11:41 +02:00
committed by admin
parent c3b7128006
commit f071c7fb43
4 changed files with 138 additions and 19 deletions
+39
View File
@@ -0,0 +1,39 @@
#!/usr/bin/env bash
# Custom entrypoint for the act_runner cache-server.
#
# The upstream image's /usr/local/bin/run.sh hardcodes `act_runner daemon`
# and ignores argv. So we replace the entrypoint here.
#
# cache-server also requires cache.external_secret to be set in config.yaml
# as a literal value (not a file path). We keep the value in a Docker
# secret and substitute it into a runtime copy of config.yaml before
# exec'ing act_runner.
set -eu
SECRET_FILE="${ACT_RUNNER_EXTERNAL_SECRET_FILE:-/run/secrets/gitea_cache_secret}"
CONFIG_FILE="${CONFIG_FILE:-/cfg/config.yaml}"
if [[ ! -s "$SECRET_FILE" ]]; then
echo "cache-server-run: secret file $SECRET_FILE is missing or empty" >&2
exit 1
fi
if [[ ! -f "$CONFIG_FILE" ]]; then
echo "cache-server-run: config file $CONFIG_FILE not found" >&2
exit 1
fi
SECRET_VALUE="$(cat "$SECRET_FILE")"
# Render a copy of config.yaml with cache.external_secret replaced by the
# secret's literal value. /cfg/config.yaml is a read-only Swarm config mount,
# so we cannot edit it in place. Use a plain-file replacement — the
# upstream config.yaml has the form `external_secret: ""` (or any literal)
# on a single line, so a simple sed is safe.
RUNTIME_CONFIG="/tmp/config.runtime.yaml"
cp "$CONFIG_FILE" "$RUNTIME_CONFIG"
# Replace the value after `external_secret:` on a single line.
# Use a delimiter unlikely to appear in the secret.
sed -i "s|^ external_secret:.*$| external_secret: \"${SECRET_VALUE}\"|" "$RUNTIME_CONFIG"
exec /usr/local/bin/act_runner cache-server --config "$RUNTIME_CONFIG"
+8 -18
View File
@@ -70,26 +70,16 @@ runner:
- "ubuntu-22.04:docker://docker.gitea.com/runner-images:ubuntu-22.04"
cache:
# Enable cache server to use actions/cache.
enabled: true
# The directory to store the cache data.
# If it's empty, the cache data will be stored in $HOME/.cache/actcache.
dir: ""
# The host of the cache server.
# It's not for the address to listen, but the address to connect from job containers.
# So 0.0.0.0 is a bad choice, leave it empty to detect automatically.
host: ""
# The port of the cache server.
# 0 means to use a random available port.
port: 0
# The external cache server URL. Valid only when enable is true.
# If it's specified, act_runner will use this URL as the ACTIONS_CACHE_URL rather than start a server by itself.
# The URL should generally end with "/".
# Requires external_secret below to be set to the same value on both this runner and the cache-server.
external_server: ""
# Shared secret between this runner and the external `act_runner cache-server`. Required when external_server
# (or `act_runner cache-server`) is in use: the runner pre-registers each job's ACTIONS_RUNTIME_TOKEN with the
# cache-server, and the cache-server enforces bearer auth + per-repo cache isolation.
# Point at the dedicated gitea_cache_server container on the `gitea` overlay.
# The runner's built-in cache server binds to an interface unreachable from
# per-job container networks, causing ~9 min/job wasted on
# "reserveCache failed: connect ETIMEDOUT" (see gitea/actions/runs/16 job #248).
host: "gitea_cache_server"
port: 37051
external_server: "http://gitea_cache_server:37051/"
# Read from the gitea_cache_secret Docker secret (see stack-compose.yml).
external_secret: ""
container:
+36
View File
@@ -0,0 +1,36 @@
#!/usr/bin/env bash
# Custom entrypoint for the gitea_runner service.
#
# Same trick as cache-server-run.sh: act_runner requires cache.external_secret
# to be a literal string in config.yaml, not a file path. We keep the value in
# a Docker secret and substitute it into a runtime copy of config.yaml, then
# exec the image's own /usr/local/bin/run.sh (which handles registration +
# daemon).
set -eu
SECRET_FILE="${ACT_RUNNER_EXTERNAL_SECRET_FILE:-/run/secrets/gitea_cache_secret}"
CONFIG_FILE="${CONFIG_FILE:-/cfg/config.yaml}"
if [[ ! -s "$SECRET_FILE" ]]; then
echo "runner-run: secret file $SECRET_FILE is missing or empty" >&2
exit 1
fi
if [[ ! -f "$CONFIG_FILE" ]]; then
echo "runner-run: config file $CONFIG_FILE not found" >&2
exit 1
fi
SECRET_VALUE="$(cat "$SECRET_FILE")"
# Render a runtime copy with the secret substituted in.
RUNTIME_CONFIG="/tmp/config.runtime.yaml"
cp "$CONFIG_FILE" "$RUNTIME_CONFIG"
sed -i "s|^ external_secret:.*$| external_secret: \"${SECRET_VALUE}\"|" "$RUNTIME_CONFIG"
# The upstream run.sh reads $CONFIG_FILE from the environment to pass
# --config to act_runner. Override it so registration + daemon both pick up
# the runtime copy with the substituted secret.
export CONFIG_FILE="$RUNTIME_CONFIG"
exec /usr/local/bin/run.sh
+55 -1
View File
@@ -1,4 +1,8 @@
# Gitea Actions stack. Uses a dedicated act_runner cache-server so that
# job-container networks can reach the cache backend via Swarm service DNS
# (gitea_cache_server:37051) instead of the unreachable IP the built-in
# cache server binds to per-job.
services:
server:
image: docker.gitea.com/gitea:1.27.0
@@ -19,6 +23,7 @@ services:
runner:
image: docker.io/gitea/act_runner:nightly
entrypoint: ["/usr/local/bin/runner-run.sh"]
environment:
CONFIG_FILE: /cfg/config.yaml
GITEA_INSTANCE_URL: "https://gitea.rudolf.keenetic.link"
@@ -26,14 +31,51 @@ services:
GITEA_RUNNER_NAME: "runner1"
GITEA_RUNNER_LABELS: "runner_label1"
# GITEA_RUNNER_EPHEMERAL: "1"
ACT_RUNNER_EXTERNAL_SECRET_FILE: /run/secrets/gitea_cache_secret
networks:
- gitea
# - nginx_ingress
configs:
- source: runner_config
target: /cfg/config.yaml
mode: 0444
- source: runner_run
target: /usr/local/bin/runner-run.sh
mode: 0755
volumes:
- /var/run/docker.sock:/var/run/docker.sock
secrets:
- gitea_cache_secret
deploy:
restart_policy:
condition: on-failure
delay: 5s
max_attempts: 3
cache_server:
# The image's /usr/local/bin/run.sh hardcodes `act_runner daemon` and
# ignores argv, so passing `cache-server` via `command` doesn't help —
# the daemon path is always taken. We replace the entrypoint by
# mounting our own script via a Swarm config (file mount), then have it
# substitute the Docker secret literal into a runtime copy of
# config.yaml's cache.external_secret and exec act_runner.
image: docker.io/gitea/act_runner:nightly
entrypoint: ["/usr/local/bin/cache-server-run.sh"]
environment:
ACT_RUNNER_EXTERNAL_SECRET_FILE: /run/secrets/gitea_cache_secret
networks:
- gitea
volumes:
- cache_data:/root/.cache/actcache
secrets:
- gitea_cache_secret
configs:
- source: runner_config
target: /cfg/config.yaml
mode: 0444
- source: cache_server_run
target: /usr/local/bin/cache-server-run.sh
mode: 0755
networks:
nginx_ingress:
@@ -44,6 +86,17 @@ networks:
configs:
runner_config:
file: ./config.yaml
cache_server_run:
file: ./cache-server-run.sh
runner_run:
file: ./runner-run.sh
secrets:
gitea_cache_secret:
# Create once before first deploy (or to rotate):
# echo -n "$SECRET" | docker secret create gitea_cache_secret -
# Then `docker stack deploy -c stack-compose.yml gitea`.
external: true
volumes:
data:
@@ -52,4 +105,5 @@ volumes:
type: nfs
o: addr=192.168.1.96
device: :/root/volumes/gitea
# device: :/media/DATA/runtime/gitea
# device: :/media/DATA/runtime/gitea
cache_data: